Water-saving faucet installation skills

The faucet is an indispensable product in the kitchen and bathroom, and we cannot measure it by the size of the head. Аммо, everything is a double-edged sword, which brings convenience and also has many failures. The failure of the faucet is largely not just a quality decision, and its installation module also occupies a large position. The editor specially brings you faucet installation skills. Have you mastered the best water-saving installation method?

The installation of the single-hole kitchen faucet requires a stable installation, because the kitchen faucet is used frequently and is easily loosened when being moved around, so the lock nut must be tightened. Now there are some faucets on the market to fix the screw tube with enlarged nut. This kind of stabilization effect is very good. If the problem of water removal and lifting can be solved, it will be a popular trend in the future.

Installation of single-hole basin faucet When buying a single-handle basin faucet, you should pay attention to the diameter of the outlet. Имрузхо, most of the water in the market belongs to the hard pipe. Suitable. During installation, a special angle valve must be selected, and the angle valve must be fixed to the hot and cold water pipes from the wall.

When you find that there is a distance between the angle valve and the water pipe on the faucet, you must purchase a special extension pipe to connect it. Never use other water pipes to connect, because if the water pressure is high, it will easily fall off and leak water. loss. If the inlet pipe is too long to exceed the outlet pipe, the part can be cut off according to your needs. If the angle is not appropriate, you can bend it to the position you need. Do not bend hard to 90° or more than 90°. When installing the basin to drain, please don’t forget to buy the small port of the faucet. Please don’t forget to flush the water pipe buried in the wall before you install it.

Before installing the thermostatic faucet, please check whether the water pipes are hot on the left and cold on the right. Do not connect the hot and cold water pipes incorrectly to prevent the faucet from not working properly. Gas and solar water heaters cannot use thermostatic faucets because the water pressure is too low. Don’t forget to install the hot and cold water filter when installing the thermostatic faucet.