Dobavljač tvornice slavina iVIGA
What should I do if the shower sprinkler has small water flow, leaks, or is blocked?
Showers are commonly used at home. What if one day suddenly finds that the water flow is very small, the shower is leaking, or the shower is blocked? Do you know how to fix it? Is it the cause? Let’s take a look at how to deal with these things.
What is the reason for the small water sprinkling
Whether it is a workplace worker who is mentally stressed or a worker who consumes a lot of physical energy, whenever the body and mind is exhausted, just take a decompression hot bath to refresh and refresh. The blood is resurrected, but it is drizzle when the flower is opened?
1. Is the tap water pressure of the user’s home smaller than before: If so, you need to find a tap water company to check the water supply pipeline and pressure
2. The valve of the pipeline connected to the water heater is opened smaller: open the water inlet valve larger.
3. Due to the high floor and the low water pressure of the water source, the water output will be smaller after the pressure is reduced by the mixing valve. At this time, it is recommended to connect a water heater in series between the water supply valve and the water inlet Booster pump.
4. The water mixing valve is congenital inadequate, the diameter is small, and the throttling causes the water output to become small: the inlet end of the detachable water mixing valve, try to connect it to the water heater’s water supply valve with a hose, or connect the nozzle hose directly to Try the hot water outlet end of the water heater, and distinguish the quality of the mixing valve according to the water output of the nozzle; replace the mixing valve of the formal brand under the premise of the water pressure of the water source.
5. Improper installation, deformed rubber ring, uneven or thin water outlet pipe joint, mismatch between hose and shower, itd.: Select the appropriate hose and shower according to the specifications, replace the rubber ring, and reinstall.
6. The sprinklers are congenital insufficiency and large internal resistance leads to small water output: replace the sprinklers.
7. The shower pipe is broken, and the pipe is clogged to prevent water: the water pipe needs to be protected during use. Although the creases will not only affect the appearance, but there are many creases that are prone to water leakage.
8. The nozzle is clogged, resulting in poor water flow. općenito, if the water in the home is too alkaline and contains some impurities, it is easy to block the shower holes; in addition, air deposits and dust will enter the interior through the shower holes and accumulate for a long time. It will also block the shower; improper adjustment of the shower nozzle may also cause the increase of foreign matter and scale.
The solution to the nozzle blockage
1. Rotate and adjust the shower nozzle.
2. After disassembling the nozzle, place the nozzle with the spray eye facing upward, and find a soft object to gently touch it to shake off the clogged gravel. Istovremeno, clean the nozzles one by one, and then repeatedly clean them with clean water. , Then install and restore.
3. Go to the supermarket to buy a bottle of descaling agent to remove dirt, and remove the shower head. Put it in the water and clean it well with a descaling agent, and generally it will be faster to clean it with warm water. After rinsing, be sure to wipe off the descaling agent left on the shower head, and then install the shower head as it was.
4. Take out a little vinegar (rice vinegar) and immerse the shower in the vinegar. Be sure to immerse all the small holes in the vinegar. Wait about ten minutes before taking it out, and then rinse with water to remove the vinegar remaining in the shower.
Osim toga, if your shower head is fixed on the wall, it cannot be removed and soaked in vinegar. You can fill the sprinkler with a plastic bag filled with vinegar, stick it with tape and let it sit overnight, and then remove the vinegar bag the next morning. But be careful not to stick the tape to the wire board or paint.
Istovremeno, be careful not to use strong acid when removing scale, so as not to cause corrosion to the shower surface.
What should I do if the shower is leaking?
Shower blockage problem
If the shower nozzle is used for a long time, the water output will become smaller. This is because the water quality is not good, the water contains a lot of alkali, and the scale deposits on the water outlet, causing the shower to be blocked. At this time, the brand’s after-sales service will be effective. When buying a shower, you don’t have to choose well-known brands, but you must choose those brands that everyone recognizes.
Shower plating problem
It is ugly to see the paint peeling off the coating of the shower head. If you have just bought the shower head for a short time, this problem will affect the appearance. Osim toga, some poor-quality showers will block because of paint falling off. So we have to take a closer look at whether there are any problems with the surface of the purchased shower head.
When buying a shower, you must carefully observe whether the surface of the shower is smooth or not. If it feels a bit rough to the touch, it must be a second-processed shower, let alone the quality.
Material problem
Some showers are made of plastic or cast iron. Plastic materials may add a lot of waste, and the service life will not be very long. Of course, some hand-held showers can use organic glass ABS and other materials. Međutim, it is not recommended that you choose the shower head made of cast iron, which is extremely easy to rust. Many customers regretted the purchase of this shower head. Because it didn’t take long before it started to rust. Even if it looks ugly, it also clogs the water outlet, it is best if the entire shower is broken. Trenutno, the best material is pure copper shower head. If it is good in the market, most of it is made of pure copper.
What should I do if the shower head leaks?
1. Kako procijeniti curi li glava tuša
1. Dlanom pokrijte izlaz vode na glavi tuša, and use your mouth to blow into the water inlet to check whether there is water leakage. Ako dođe do curenja, glava tuša će curiti.
2. When the shower head is flowing with water, it is slightly tilted on one side when the water is discharged, lako je vidjeti curi li glava tuša.
3. Multifunctional shower heads are the easiest to leak when they have dual functions. Neke glave tuša ne propuštaju vodu samo u jednom uzorku, but it is difficult to ensure that they will not leak under dual functions.
2. Kako riješiti problem curenja vode u glavi tuša
1. Popravite curenje na kugli upravljača glave tuša.
Otopina: Prvo odvrnite glavu tuša od prstena upravljača, pronađite O-prsten ili sličnu brtvu unutra i zamijenite je, a zatim okrenite glavu tuša natrag u prvobitni položaj.
2. Leakage occurs at the joint of the shower head handle.
Otopina: Odaberite odgovarajuće crijevo za tuš i slavinu prema specifikacijama, zamijenite njegov gumeni prsten, i ponovno ga instalirajte. Prvo pomoću kliješta za pričvršćivanje odvrnite ručku glave tuša od crijeva. Očistite navoj na ručki glave tuša, i premažite vodovodnu cijev posebnim ljepilom ili zalijepite posebnu traku na okolno područje. Zatim okrenite glavu tuša natrag i zategnite je, i uklonite višak ljepila i trake.
3. Curenje vode u glavi tuša također može biti uzrokovano pijeskom ili talogom u glavi tuša, ili nakupljene perut i mineralne naslage.
Otopina: Odvijte glavu tuša za čišćenje. Ako je potrebno, natopite dijelove octom, i izribajte dijelove, pazeći da ih ne ogrebete. Ako je glava tuša podesive vrste mlaza, pažljivo provjerite sve pokretne dijelove na znakove prekomjernog trošenja. Ako se rotirajuća ručka ne može glatko pomicati ili je unutarnji brijeg slomljen, potrebno je zamijeniti cijelu glavu tuša.
4. Fina voda iz glave tuša postaje mješavina grube i fine.
Otopina: Rotirajte i namjestite glavu tuša. Ako i dalje ne radi, odvijačem otvorite mali okrugli čep na sredini glave tuša, otvorite glavu tuša i isperite vodom. Rupu tuša možete također očetkati četkicom za zube, a zatim ga instalirati i vratiti. može.
Što učiniti ako tuš curi uči nas kako riješiti problem tuša. Međutim, kako biste u potpunosti uklonili problem curenja vode u tušu, potrebno je kupovati proizvode zajamčene kvalitete, obratite pozornost na održavanje, i zamijenite ih na vrijeme kada istekne vijek trajanja. Svaki korak se mora pratiti na mjestu.
Što trebam učiniti ako je glava tuša začepljena?
Nakon dužeg korištenja, glava tuša će biti blokirana. Ovo je prirodno. To ne znači da je glava tuša pokvarena. ne brini, uopće ne morate kupiti novi. To je zbog stvaranja kamenca nakon dugotrajnog ispuštanja vode. , Trebate samo rastaviti i očistiti glavu tuša.
Dip in vinegar
Ako vam je glava tuša dugo vremena začepljena, a veliki broj rupa je začepljen. So using a needle to pierce one by one is obviously not showing up. U ovom slučaju, preporuča se korištenje zakiseljavanja za uklanjanje prašine kako biste riješili problem začepljenih glava tuša. Morate pripremiti malo bijelog octa. Ulijte ocat u lavor tako da se glava tuša može uroniti. Nakon namakanja u octu desetak minuta, kamenac u glavi tuša se može ukloniti.
Acupuncture
Ako su neke od malih rupa u tušu u vašoj kući začepljene, then let the water out first, and you can see that the holes are blocked at the bottom. Zatim morate otvoriti glavu tuša i vidjeti da na glavi tuša ima mnogo malih rupa poput glave tuša. Ovdje voda izlazi. Zatim prvo pripremimo iglu, and then use the needle to pierce the impurity in the perforation with the small hole that we just saw without water until there is no impurity in the hole. Ova metoda je najjednostavnija, ali pazite da probušite rupu za tuširanje.
Use lubricant
If the metal of the shower head is rusted and the blockage is very serious, then use WD-40 rust-removing and anti-rust lubricant. This rust removal lubricant can have very good affinity and permeability with metals. The rust layer can be separated from the metal layer. Make the rusty part and the metal contact surface, and leave a protective film. Let the shower never rust to death. This method may be used if the shower head in your home is not made of stainless steel.
