विविध गरम आणि थंड पाण्याच्या नळांच्या स्थापनेच्या पद्धती

Installing hot and cold water faucets is the choice of many friends’ home decoration, so we don’t have to worry about washing our face with cold water and gargle in winter, then how to install the hot and cold water faucets?

1. Installation of single hole basin faucet

सिंगल-हँडल बेसिन नल खरेदी करताना, you should pay attention to the diameter of the water outlet. सध्या, most of the water in the market is filled with hard pipes. Pay attention to the reserved water pipe height, which is about 30 minutes from the basin. स्थापनेदरम्यान, एक विशेष कोन झडप निवडणे आवश्यक आहे. The angle valve must be fixed to the hot and cold water pipes from the wall. If there is a distance between the angle valve and the water pipe on the faucet, you need to purchase a special pipe to extend the link. Do not use other water pipes to connect, otherwise it will leak or fall off due to high water pressure. इनलेट पाईप आउटलेट पाईपपेक्षा जास्त लांब असल्यास, just cut off the excess.

नोंद: Do not hard bend the water pipe to 90 अंश किंवा त्याहून अधिक 90 अंश. निचरा करण्यासाठी बेसिन स्थापित करताना, please do not forget to purchase the small connector of the faucet (नळ शॉर्ट सर्किट करा). The water pipes buried in the wall must be flushed before installation.

2. शॉवर आणि बाथटब नलची स्थापना

If you buy a shower, बाथटब, किंवा भिंत-आरोहित नल, you need to choose a suitable height to bury the water pipe. The distance between the hot and cold water pipes is about 20 or more. Flush the water pipe before installation to avoid damage to the faucet due to hard water.

लपवलेले शॉवर आणि बाथटब नळ: लपविलेले नल खरेदी केल्यानंतर, नळाचा व्हॉल्व्ह कोर सामान्यतः भिंतीमध्ये पूर्व-दफन केलेला असतो. Consider the thickness of the bathroom wall before embedding. जर भिंत खूप पातळ असेल, वाल्व कोर एम्बेड केला जाणार नाही. प्री-एम्बेडिंग दरम्यान वाल्व कोरचे प्लास्टिक संरक्षणात्मक कव्हर सहजपणे काढू नका, जेणेकरुन सिमेंट आणि इतर कामांमुळे व्हॉल्व्ह कोअरचे नुकसान टाळता येईल. याव्यतिरिक्त, आपण वर आणि खाली लक्ष दिले पाहिजे, चुकीचे स्पूल टाळण्यासाठी स्पूल एम्बेड करताना स्पूलच्या डाव्या आणि उजव्या दिशा.

3. थर्मोस्टॅटिक नलची स्थापना

थर्मोस्टॅटिक नल स्थापित करण्यापूर्वी, first check which side of the water pipe is cold water and which side is hot water, especially if the hot and cold water pipes are connected incorrectly, so as not to affect the future work of the faucet. Gas and solar water heaters cannot use thermostatic faucets, mainly because the water pressure is too low. The installation of thermostatic faucet also requires the installation of hot and cold water filters.

4. Installation of single-hole kitchen faucet

Because the kitchen faucet is used frequently, and it is easy to loosen when moved around, all requirements for stability are taken for granted, so the lock nut must be tightened. सध्या, there are a number of spiral pipes whose leading heads are enlarged nuts in the building materials market, which have excellent stability. Obvious effects will become the trend of the generation.

Reviews

Installing hot and cold water faucets at home can indeed solve many problems. It is no wonder that so many friends want to know the installation methods of hot and cold water faucets. I hope you can understand the installation methods of hot and cold water faucets introduced in this article.