iVIGA टॅप फॅक्टरी पुरवठादार
Use materials already in the household pantry to remove hard water stains and dirt on the shower head!
For most people, cleaning the shower head is nothing exciting. As part of regular bathroom housework, it can easily be forgotten.The things we use to clean things may themselves need to be cleaned, which may be counterintuitive.However, because they are used a lot, they do require some attention.When mineral deposits and hard water stains begin to accumulate, not only does the shower head become unsightly,but the nozzle of the shower head may become clogged, preventing water flow or changing the shower pressure.It is not difficult to clean these bathroom equipment so that they work at maximum efficiency.Here are five ways to turn housework into a satisfying do-it-yourself trick and avoid the use of harsh and destructive chemicals on bathroom fixtures.
1. Frosted with lemon juice
If your shower has a thin layer of deposits, try using lemon juice and salt. Acidic fruits can naturally remove mineral deposits, while salt is a convenient scrub. Pour some salt on a slice of lemon and wipe it off. अर्थातच, flush the nozzle by turning on the shower for a few minutes on the heat setting.
There are many benefits to using lemon as part of the cleaning program. Due to its antibacterial properties and high acidity, lemon is a natural cleaner that can clean various materials such as wood or fabric. The lingering lemon scent will give your bathroom a mild and refreshing scent.
2. Unclog the nozzle
Hard water stains are a common problem in areas with high calcium content in the water. Due to frequent use of showers, hard water deposits can accumulate and clog the nozzles on the shower head. A layer of dirt and minerals will cover the holes and prevent water from leaving the fixture, making your shower ineffective.
An easy way to keep the holes from clogging is to rub the nozzle with your fingernail. The small movement of gently rubbing the nozzle with your finger can remove the dirt that has blocked the hole. Cleaning the toothbrush is equally effective. If the nozzle is still clogged, consider using a toothpick or pin to poke into the nozzle hole. This will ensure that there is room for water to escape from the fixture. Carefully insert the tip into the correct hole to prevent any damage.
3. Use plastic bags
White distilled vinegar is commonly used as a cleaning product for bathrooms, सरी, and kitchens. As a mild acid, it can effectively remove dirt and kill bacteria without the use of harsh chemicals. Due to its high acidity, vinegar can remove mineral deposits such as rust, soap scum and lime, making it a perfect cleaning product for shower heads.
प्रथम, find a plastic bag, such as a freezer storage bag with a sealed edge, that can be attached to the fixture. Fill 2/3 of it with white distilled vinegar. Dip your shower head in the water, and tie the bag to the shower arm with a rubber band or cable tie to ensure its safety.
Let the fixture soak overnight. After a few hours, when the acidic liquid starts to work its magic, you may see dirt and minerals peeling off the shower head. After the shower is fully soaked, just take out the bag, wipe off the residue on the surface, and then turn on the shower for a few minutes to rinse off the remaining vinegar. This should successfully remove any spots or rust.
4. Rub with baking soda
Baking soda is another ingredient used for efficient and safe cleaning. This natural deodorant is a mild abrasive that can break down dirt. Many people use this product to unclog sewers, clean dirty metal and eliminate musty odors. The versatility of baking soda makes it an ideal choice for cleaning shower heads.
प्रथम, mix baking soda and warm water to make a scrub. Once you get an easy-to-use consistency, put on gloves and start applying the paste to the shower head. Rub the baking soda into the nozzle and the surface of the fixture.
If there are water stains, stains, or mineral deposits on the shower head that are difficult to remove, consider using a toothbrush to help apply the paste. When finished, wipe off the paste and dirt with a soft cotton cloth, and then run the shower to remove the nozzle. Your shower head will look brighter and cleaner.
5. Soak in a container
Likewise, using vinegar as a cleaning product is a good idea because it has many benefits. The shelf life is about three to four years, and it is safe for human contact and even consumption. As long as you avoid mixing vinegar with bleach, this acidic liquid is a biodegradable environmentally friendly solution that can easily clean floors, windows, plumbing fixtures, and electrical appliances.
If your shower head needs a thorough, deep cleaning, you may need to unscrew the fixture and soak the entire shower head for a long time. To do this, make sure that the water is safely turned off, then grab the bottom of the shower arm and rotate the head counterclockwise. Rotate the fixture until it falls off, then soak the entire shower head in a container of white distilled vinegar. If your shower is old and cannot be easily unscrewed, please research your shower brand and learn how to remove the fixture.
Let your shower head soak for a day or two, then reconnect it to the shower arm, and rinse the nozzle several times before using it.
When to replace the shower head
If none of the above methods work for you, please consider buying a cleaner that specifically removes mineral deposits such as calcium or lime. तथापि, if this does not remove the dirt or stains, you may need to replace the shower head.
If you live in a place that uses hard water, you may need to change the shower head more frequently due to the high calcium content in the water. The precaution you can take is to insert a shower filter. This convenient product prevents clogging and prevents bacteria or sediment from escaping from the nozzle during your shower. These filters are cheap and easy to replace, and they can help you avoid frequent shower head replacements. तथापि, these shower head fixtures should still be cleaned frequently and thoroughly.
Cleaning your shower head is a weekly cleaning program that is often overlooked and overlooked. तथापि, it does not need to be handled frequently, nor does it require any harsh chemicals. By using these methods, you can clean the fixtures, keep them shiny and clean, and even extend the efficiency and service life of the shower head.