iVIGA Tap ຜູ້ຜະລິດໂຮງງານຜະລິດ
You managed to find the perfect kitchen sink for your home. You bought it, and the courier service just delivered it. Now all you have to do is to install it. In the following section, we’re going to explain how to install a kitchen sink in easy steps.
Make It Fit –
ທໍາອິດ, you need to make the sink fit where you’re planning to install it. Most sink manufacturers will provide a cutting template that will help you modify the countertop so the sink will fit perfectly. If a cutting template was not included, you have to make the measurements yourself.
Modify The Countertop –
Some countertops come with a predefined hole for the sink. If the hole is not large enough, measure the differences and modify the countertop. If there aren’t any holes, make them yourself.
Mount The Sink –
Place the sink in the new hole and install the faucet hoses. Make sure the sink is firmly locked in place by using the washers and nuts provided by the manufacturer. Sometimes, the manufacturer would include a seal or gasket in the sink’s box. Make sure you use them as well. If there were no seals in the box, you should use caulk to make sure water won’t reach inside the countertop. Secure the sink’s retaining clips from the underside to ensure a snug fit. Wipe the excess caulk away if you used any. Connect the faucet’s hoses to the waterline.