iVIGA Tap Factory Fournisseur
【Schlagzeilen】 Juli 1, 2022 Weider! D'Waassereffizienzmark muss bei Duschen bäigefüügt ginn, Waasser Purifiers
Viru kuerzem, the National Development and Reform Commission, the Ministry of Water Resources, the General Administration of Market Regulation jointly issued the “People’s Republic of China to implement the water efficiency labeling product catalog (the third batch) and the shower, water purifier water efficiency labeling implementation rules” (development and reform of environmental regulations [2021] No. 1755).
The notice said that since July 1, 2022, the factory showers, water purifier products must be added to the water efficiency label. Products shipped or imported before July 1, 2022, can be delayed until July 1, 2023 to add.
Ënnert hinnen, den “shower water efficiency labeling implementation rules” cover the scope of the product in the shower (including shower or shower combination) used on the sanitary facilities. It is installed in the following conditions of the washroom (Toilette, bathroom), shower room, etc.: the end of the cold and hot water supply pipeline in the building, with a nominal pressure (static pressure) of not more than 1.0MPa, and the medium temperature of 4 ℃ ~ 90 ℃. This does not apply to showers with their own heating devices and thermostatic showers. The main information marked on the water efficiency label of the shower includes the producer, product specifications, water efficiency rating, flow rate and other content. The shower water efficiency grade is based on the national standard “Shower water efficiency limits and water efficiency grade” (GB 28378-2019) to determine.
Water Purifier Water Efficiency Labeling Implementation Rules” covers the product range of municipal tap water or other centralized water supply as raw water, reverse osmosis membrane or nanofiltration membrane as the main purification element, for small water purifiers for home or similar premises. This does not apply to the length or width or height ≥ 2000mm, weight ≥ 100kg and water purification flow ≥ 3L / min large water purifier. The main information marked on the water purifier’s water efficiency label includes the producer, product specifications, water efficiency rating, water purification rate, the rated total water purification. Water purifier water efficiency level based on the national standard “water purifier water efficiency limits and water efficiency level” (GB 34914-2021) to determine.
Water efficiency mark
Water efficiency labeling is called water efficiency information labeling of water products, which is an information label attached to the water appliance/product. It is mainly used to indicate the water performance of the product (usually expressed in the form of water consumption, flow), to provide consumers with the necessary information for decision-making when purchasing, in order to guide and help consumers to choose products with higher water efficiency.
Water efficiency level
The water efficiency level is the core content of the water efficiency mark. Water efficiency level is based on the national standards for products. As an information mark, the water efficiency mark visually expresses the water efficiency level of water products. The water efficiency level is the most important indicator to judge whether the product is water-saving. The smaller the value of the product’s water efficiency level, the better the water-saving effect.
Previously, toilets, intelligent toilets and dishwashers 3 products into the water efficiency logo catalog. Consumers need to pay attention to whether the product is required to add the water efficiency mark when buying.